RATEK Multi Tube Vortex Mixer

Platform size of 320 x 200mm
Speed range approx 200 to 3,000 RPM
LCD digital timer with countdown or pulse mode
Vortex virtually any container
Will accommodate a whole rack of test tubes

Category: Tag:

The MTV1 can hold a standard test tube rack full of tubes (of equal length) up to the maximum platform size, for timed or continuous hands free mixing. In the countdown mode the mixer can be set for a maximum of 99 minutes 59 seconds. In the pulse mode the mixer can be set to run in cycles of up to 99 seconds on and up to 99 seconds off. The MTV1 can also be used as a manual vortex mixer, with the clamping plate removed various tubes or flasks can be held against the platform at any angle to achieve the desired mixing action. The adjustable speed control allows for the mixing action to be varied as required.

Applications:

Vortex mixers are used for thorough mixing of precipitates in test tubes, small bottles or flasks. In cell culture and microbiology laboratories they may be used to suspend cells. In a biochemical or analytical laboratory they may be used to mix the reagents of an assay or to mix an experimental sample and a dilutant.

Also known as: Vortex Agitator, Vortex Shaker, Liquid Mixer, Test Tube Mixer, Laboratory Tube Mixer and Multi Tube Mixer.

Specifications

Power requirements240vac/ 40w
ControlContinuously variable from 750 to 3000 RPM with load
Capacity320 x 200mm platform (max 250mm vertical clearance)
Motor12V DC
Orbit diameter4mm
Overall DimensionsW325 x D300 x H440 mm
Weight17kg

Servicing, Calibration and Support

Imbros’ local engineering department can service, repair and calibrate your instrument without expensive shipping costs or wait times.

FIND OUT MORE

Download Data Sheet
Visit Manufacturer’s Site

Make An Enquiry