RATEK Immersion Cooler

580 Watts cooling capacity
Corrosion resistant stainless steel immersion coil
Mounting clamp fixes the coil to any tank
Below-ambient and sub-zero control with THx000
110mm minimum water level

Category: Tag:

Suitable for a variety of cooling applications suiting an immersion cooling coil (such as fermentation). Can be used on it’s own to bring the temperature of liquids/fluids below ambient, and can be used in conjunction with a thermoregulator to achieve a set temperature below ambient.

The RC1 has an insulated stainless steel flexible line approximately 1 metre long with a stainless steel coil supported by an adjustable mounting bracket. This cooler can cool 8 litres of water in an insulated tank from 30°C to 5°C in approximately 25 mins.

When used with the Ratek TH5 Thermoregulator the RC1 can provide temperature controlled water at or below ambient temperatures, accurate to ± 0.1°C. For temperatures below 0°c a solution of Ethylene Glycol 50% / Water 50% is recommended. The case for the RC1 is manufactured from a corrosion resistant plastic to provide durability. Only environmentally friendly R134a refrigerant is used in Ratek coolers. Suitable Insulated tanks are available for use with the RC1.

Full Specifications
Power requirements240VAC/580 Watts
Compressor¼ HP air-cooled hermetic condensing unit
Cooling capacity in WattsAverage approx. 600watts between 30ºC and 5ºC
Overall dimensionsL460 X H320 X W340mm

Servicing, Calibration and Support

Imbros’ local engineering department can service, repair and calibrate your instrument without expensive shipping costs or wait times.


Visit Manufacturer’s Site

Make An Enquiry