MicroPlastic Sediment Separator MPSS

Density Separation of Microplastic Particles from Sediment Samples

The MicroPlastic Sediment Separator MPSS enables a reliable separation of different ecologically relevant size classes of plastic particles from sediment samples. A ZnCl2-solution (1.6-1.7 kg/L) or Sodium Polytungstate  (non-toxic alternative)  as separation fluid allows for an extraction of plastic particles ranging from large fragments to small microplastic particles (S-MPP, < 1 mm). Subsequent identification and quantification of the particles with a spatial resolution down to 1 μm can be performed using Raman Microspectroscopy.


The MPSS is divided into three major components which are entirely made of stainless steel, the edgeless hydrodynamic flange geometry enables an undisturbed ascent of the plastic particles:
The stainless steel sediment container is equipped with a rotor, maintaining a constant stirring of the sample to guarantee a perfect excavation of the particles of interest. The combination of servomotor and speed controller allows for individually adjusted rotational speeds of the stirrer from 0 up to 20 rpm.


The conical standpipe smoothly reduces the diameter of the instrument to achieve a high particle concentration in the extracted sample volume.


The sample chamber is equipped with two glass tubes for easy supervision of the separation process. It can be closed by a ball valve and disconnected from the standpipe. The resulting small sample volume of 95 ml allows for an effective vacuum filtration via the integrated 47 mm filter holder.


An additional aluminium base frame with brake rollers cares for mobility and stable standing.


First studies of the MicroPlastic Sediment Separator MPSS substantiate recovery rates of 100% for large microplastic particles (L-MPP, 1-5 mm) and 95.5% for S-MPP – significantly higher than the values obtained by application of froth floatation (55% for L-MPP) or classic density separation (39.8% for S-MPP).


– Standardised method
– 100% recovery rate for large microplastic particles (L-MPP, 1-5mm)
– 95.5% recovery rate for small microplastic particles (S-MPP, <1mm)
– Automatic deadlock release
– Edgeless hydrodynamic flange geometry
– Duplex gasket for stirrer axle
– Volume of sample to be processed: up to 6 litres



More information from HydroBios



Make An Enquiry