Memmert Incubator I

Catalogue

Memmert Incubator I

In the laboratory, the Memmert incubator I is ideal for all applications with temperatures up to +80°C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully in this highly precise microbiological incubator.

Category: Tag:

Highly sensitive, extremely accurate: Memmert lab incubator I

  • – Temperature range up to +80 °C
  • – 8 model sizes (32 to 749 litres volume)
  • – 2 model variants: SingleDISPLAY and TwinDISPLAY
  • – Natural convection or forced air circulation N/F
  • – Double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature
  • – Activation of sterilisation routine via ControlCOCKPIT (TwinDISPLAY)

Memmert incubator I – a gentle force in the laboratory

To guarantee optimum air circulation in the incubator chamber even when it is fully loaded, both model variants SingleDISPLAY and TwinDISPLAY are available with an adjustable air fan. Since our unique all-round surface heating is optimally geared to both natural convection and forced air circulation, the fan can be switched off entirely for sensitive samples and for samples which may not be exposed to air turbulence.

  • – Intuitive and easy-to-use operating menu
  • – Air exchange rates and air flap position electronically controllable
  • – Temperature ramps programmable via AtmoCONTROL software (models with TwinDISPLAY)
  • – Pre-heated fresh air prevents temperature fluctuations
  • – Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
  • – Heating concept specifically adapted for a precise and homogenous temperature control
  • – A wide range of options for programming and documentation using interfaces, integrated data logger and software AtmoCONTROL
  • – 3 years guarantee worldwide
Intuitive operation

Fine glass and stainless steel. The elegant display has characterised Memmert lab ovens for many years now. With the newest generation of appliances it has become intelligent and interactive. Meet the Memmert ControlCOCKPIT!

It has never been easier to operate a lab oven

All adjustable parameters such as temperature (either Celsius or Fahrenheit), relative humidity, fan speed or exhaust air flap position can be set up in three quick steps without getting lost in a complicated menu. During operation all status messages, the current status of heating, ventilation and air flap position as well as time and alarm signals are visible simultaneously.

Intuitive operation of a Memmert oven or incubator

  • – ControlCOCKPIT with touch function available in two model variants: SingleDISPLAY and TwinDISPLAY.
  • – Touch, turn & go. Quick setup in three steps. Never before, a temperature control appliance has been easier to operate.
  • – Models with TwinDISPLAY additionally feature setting of device specific parameters and temperature monitoring, graphical display of the program sequence and activation of the optional interior lighting in the right display.
  • – Versatile menu functions such as language settings, time zones and daylight saving time as well as the choice between Celsius and Fahrenheit.
Stainless steel

For many years, structured stainless steel has been the unmistakable feature of Memmert ovens, incubators and climate chambers in the laboratory. Functional design in its most elegant form: scratch-resistant, hygienic, robust and durable.

Wherever Memmert ovens and heating baths are used, the superiority of high-quality stainless steel can be seen compared to coated sheet steel, which can corrode very quickly when in constant use.

For the outer housing of all Memmert appliances, structured stainless steel is used (rear walls are made of galvanised steel sheets); and for the inner chamber and sliding shelves as well as for housing, interior basin and accessories for every heating bath, stainless steel of class W-St. 1.4301 (ASTM 304) is used. Since aggressive substances are frequently used in the vacuum drying oven, the inner chamber and thermoshelves are made of stainless steel W-St. 1.4404 (ASTM 316L), and the tubing is made of stainless steel W-St. 1.4571 (ASTM 316i).

The surface roughness of conventional stainless steel can neither be felt with the fingers nor seen with the bare eyes. And yet in some circumstances they can provide a large surface for germs only a few micrometers in length. For working with biological materials the interior of the CO2 incubator ICOmed can be additionally electropolished. At the same time the corrosion resistance of the material is increased by this procedure.

Communication

We think that the programming of a lab oven should be possible from anywhere in the world without problems. For this reason, Memmert devices feature state-of-the-art communication interfaces.

An ethernet connection for reading out logs is standard for all new generation Memmert lab ovens. For appliances with TwinDISPLAY the ethernet connection can additionally be used for uploading and setting up profiles from the software AtmoCONTROL as well as for online logging. Appliances with TwinDISPLAY offer a USB port on the ControlCOCKPIT for the direct upload of programmes, for reading out logs or protecting appliances with individual user-ID function. By the way: the individual allocation of IP addresses is possible directly via ControlCOCKPIT.

Interface for programming and log function

  • – remote access for reading out logs (SingleDISPLAY) and   uploading programs (TwinDISPLAY)
  • – all appliances feature a data logger (storage capacity at least 10 years)
  • – all appliances with Ethernet interface
  • – USB port on appliances with TwinDISPLAY
  • – individual allocation of IP addresses possible directly via ControlCOCKPIT
Safety

All Memmert lab ovens feature an electronic temperature monitoring system, a mechanical temperature limiter acc. to DIN 12880 and an integrated auto-diagnostic system with optical and acoustic alarm as a standard.

Even more safety in TwinDISPLAY models

TwinDISPLAY appliances are equipped with an overtemperature monitor as well as two high-grade platinum temperature sensors Pt100 for mutual monitoring and operation transfer at same working temperature in case of an error. Particularly in ramp operation, the integrated temperature monitoring system AutoSAFETY can be activated to automatically follow the set temperature with a freely selectable tolerance. Individual MIN-/MAX-values can be set for over/undertemperature as well as for all other parameters like relative humidity, CO2, O2 and pressure (vacuum).

With the AtmoCONTROL software, alarm notifications can be sent out to an e-mail address. The optional  MobileALERT makes it possible to send the alarm notifications by SMS to a mobile phone.

Servicing, Calibration and Support

Imbros’ local engineering department can service, repair and calibrate your instrument without expensive shipping costs or wait times.

FIND OUT MORE

View all Available Models

Make An Enquiry

    Related products