Standard transparent housings for components:

• 1 x Potentiometer, 50 Ohms, 3 Watt, wire wound, in housing.
• 1 x Dual Resistors 50 Ohms, in housing.
• 1 x Dual Resistors 100 Ohms, in housing.
• 1 x Dual Resistors 500hms, in housing.
• 1 x Dual Capacitors 5uF (+/-10%) in housing.
• 1 x Dual Capacitors 10uF (+/-10%) in housing.
• 2 x Dual lamp holders, in housing.
• 2 x Switch, single pole, two way, in housing.
• 1 x Connector box (for alligator clips to hold wires)
NOTE: this list can vary slightly. Some versions of kits do not have dual components. Please get in touch for more information.

Standard general components for experiments:

• 1 x Power Supply. Input: 220/240V.AC. 50/60Hz, Output: Switched at 2, 4, 6, 8, 10, 12V output, both AC and DC at 5 amps total load. DC is full wave, unfiltered. Automatically
resetting overload with indication. With removable mains cable.
• 1 x Digital Signal Generator. Input: 220/240V.AC. Output: Sine, Square, Triangle and Sawtooth waveforms. 5V.RMS or 15V p/p, Frequency from 0.1Hz to 100 kHz. Output
current up to a useful 1 amp. Automatic overload protection. With removable mains cable.
• 1 x AC & DC Motor/Generator, hand driven, with both commutator and slip rings.
• 1 x Set of 12x cables with moulded and stackable 4mm Banana Plugs.
• 1 x Set of “U” and “I” core for transformer study, with elastic bands.
• 4 x Coils to fit the “U” and “I” core. 1x 300T, 2x 600T, 1x 1,200T.
• 1 x Set/3 plain iron cores (1x long, 2x short) for magnetic experiments.
• 1 x Aluminium Disc and Axle for eddy current brake experiment.
• 3 x Multi-meters, digital, with 4mm banana plug cables.
• 2 x Cell holders for ‘D’ cell.
• 2 x Plastic supports for holding iron cores to “U” core.
• 1 x Pair of strong bar magnets, ‘Alnico’ (75mm long x12mm x8mm).
• 2 x ‘Hodson’ motor kits. For students to wind and assemble their own DC motor (all parts provided: yoke, magnets, wire, base, axle, rotor, instructions).

2x small screw-top vials:

• 10x Plotting Compasses.
• 10x MES lamps for 2.5 Volts 200mA 10x MES lamps for 12 Volts 100mA.

3x Rolls of wire and capacitor measuring wires:
• 1x Roll: 100m Copper wire, 0.2mm diameter

• 1x Roll: 100m Resistance wire, “Constantan” 0.2mm diameter
• 1x Roll: 50m 1 Amp fuse wire, 0.05mm diameter.
• 2x Paper clips for connections etc.

Various items:
• 4x Alligator Clips, plain. Can fit to 4mm banana plugs.

• 4x Alligator Clips, fitted with 4mm banana plugs (for holding all wires).
• 2x electrode plates. 1x Copper, 1x Zinc, size 70 x 20mm.
• 2x conductivity plates, stainless steel. Size 70 x 20mm.
• 1x Ring for ‘Thompson’s Ring’ experiment.
• 1x Compass for determining North/South Pole of magnetic fields.