Industrial Scientific GasBadge Pro Single-Gas Monitor
The Industrial Scientific GasBadge Pro is a compact, configurable single-gas monitor designed for personal protection against oxygen deficiency or a wide range of toxic gas hazards. With interchangeable sensors, a user-replaceable battery and clear audible, visual and vibrating alarms, the GasBadge Pro provides a practical solution for routine personal gas monitoring across industrial, environmental and utility applications.
GasBadge Pro is available for monitoring CO, H₂S, O₂, NO₂, SO₂, NH₃, Cl₂, ClO₂, PH₃, HCN and H₂, as well as a carbon monoxide sensor with reduced hydrogen interference. Its broad sensor selection makes it particularly useful where a dedicated single-gas detector is preferred over a larger multi-gas instrument.
GasBadge Pro at a Glance
- – Single-gas monitoring with a wide selection of interchangeable sensors
- – Monitors oxygen or toxic gases including CO, H₂S, NO₂, SO₂, NH₃, Cl₂, ClO₂, PH₃, HCN and H₂
- – CO sensor option with low hydrogen interference
- – User-selectable high and low alarm settings
- – Audible, visual and vibrating alarms
- – User-replaceable 3 V CR2 lithium battery
- – Typical battery runtime of approximately 2,600 hours
- – Infrared interface for instrument communication
- – Compatible with GasBadge Datalink for configuration and downloading instrument information
- – Compatible with Industrial Scientific DSX docking solutions for simplified maintenance and reporting
Available Gas Sensors
The GasBadge Pro can be configured for a single target gas. Available sensors and manufacturer-specified measuring ranges are shown below.
| Gas | Formula | Measuring Range | Resolution |
|---|---|---|---|
| Carbon Monoxide | CO | 0–1,500 ppm | 1 ppm |
| Carbon Monoxide – Low Hydrogen Interference | CO/H₂ Low | 0–1,500 ppm | 1 ppm |
| Hydrogen Sulfide | H₂S | 0–500 ppm | 0.1 ppm |
| Oxygen | O₂ | 0–30% vol. | 0.1% |
| Nitrogen Dioxide | NO₂ | 0–150 ppm | 0.1 ppm |
| Sulfur Dioxide | SO₂ | 0–150 ppm | 0.1 ppm |
| Ammonia | NH₃ | 0–500 ppm | 1 ppm |
| Chlorine | Cl₂ | 0–100 ppm | 0.1 ppm |
| Chlorine Dioxide | ClO₂ | 0–1 ppm | 0.01 ppm |
| Phosphine | PH₃ | 0–10 ppm | 0.01 ppm |
| Hydrogen Cyanide | HCN | 0–30 ppm | 0.1 ppm |
| Hydrogen | H₂ | 0–2,000 ppm | 1 ppm |
Applications
With its broad selection of single-gas sensors, the GasBadge Pro can be configured for personal gas monitoring across applications including:
- – Wastewater and water treatment
- – Industrial processing
- – Utilities and infrastructure
- – Mining and mineral processing
- – Chemical handling and storage
- – Manufacturing and maintenance
- – Laboratories and technical facilities
- – Agriculture and fumigation applications
- – Emergency and hazardous-material response
- – Workplaces with known single-gas hazards
Product Details
Australian GasBadge Pro Configurations
GasBadge Pro is available in Australian-approved configurations for each supported sensor type. Industrial Scientific identifies Australian-approved versions by adding an “A” suffix to the corresponding standard GasBadge Pro instrument part number.
Because the correct instrument configuration depends on the target gas and application, please contact Imbros with the gas you need to monitor and any relevant site requirements. We can assist with selection of the appropriate GasBadge Pro configuration together with compatible calibration gas, regulators and accessories.
DOWNLOAD BROCHURE
