DLOS8 Outdoor LoRaWAN Gateway With 4G

The DLOS8 is an 8 channel outdoor LoRaWAN Gateway well suited for the Telemetry2U server, as well as other LoRaWAN applications, including the TTN. It lets you bridge a LoRaWAN wireless network to an IP network via WiFi, Ethernet, 3G or 4G. It comes with a mounting kit and an external 3dbi Antenna capable of >10km range at low data rates. It’s compatible with all LoRaWAN nodes sold by Telemetry2U and comes loaded with the latest firmware, tested and pre-configured to work with perfectly with Telemetry2U’s data servers and web interface.

SKU: T2U-DLOS8-AU915 Category: Tag:

The DLOS8 uses Semtech packet forwarder and is fully compatible with LoRaWAN protocol. It includes a SX1301 LoRaWAN concentrator, which provide 10 programmable parallel demodulation paths. It is pre configured to work seamlessly with the Telemetry2U servers, but is very easy to configure via the Web GUI interface. It also has a built in GPS receiver used for location and time synchronization. The 4G modem comes pre-loaded, but the required 4G SIM card is not supplied, users must provide their own SIM card at their own cost. Using the 4G can get around complicated installations by creating a separate network rather that integrating to the existing site WiFi and firewalls.

 

GET IN TOUCH

 

Full Specifications

Attribute nameAttribute value
Features
  • Open Source OpenWrt system
  • Managed by Web GUI, SSH via LAN or WiFi
  • Emulates 49x LoRa demodulators
  • Outdoor LoRaWAN Gateway
  • 10 programmable parallel demodulation paths
  • LoRaWAN packet filtering
  • Far seeing LED indicator
  • Built-in GPS module for location & timing
  • External fiber glass antenna
  • 802.3af PoE
  • IP65
  • Lighting Protection
  • Power Consumption:12v 300 ~500mA
Applications
  • Smart Buildings & Home Automation
  • Logistics and Supply Chain Management
  • Smart Metering
  • Smart Agriculture
  • Smart Cities
  • Smart Factory
Specifications
  • 1 x SX1301 + 2 x 1257 LoRa Tranceiver
  • 10M/100M RJ45 Ports x 1
  • 1 x 2.4G WiFi (802.11 bgn)
  • 1 x USB host port
  • Power by 12v DC or PoE

 

Servicing, Calibration and Support

Imbros’ local engineering department can service, repair and calibrate your instrument without expensive shipping costs or wait times.

FIND OUT MORE

More Information from Telemetry2U

Make An Enquiry