In Memoriam: Gavin Hills – Imbros Founder – celebrates a posthumous 100th Birthday

News

The following is a short remembrance of Gavin and the early days of Imbros by Gavin’s first son and Imbros employee, Euan.

In the early 1970’s my father Gavin Hills started a part-time business providing baby care products sourced from one of his colleagues in Sydney.  He operated this business as a side line to working in the Physics Department in the University of Tasmania where he specialised in optics.  In his final years at Uni, he was a lecturer in science education.  It was there that he was frustrated with his inability to source laboratory supplies in a price effective and timely manner.

He had contacts in Sydney who encouraged him to start a laboratory supply business to compete with the other 2 locals – Selby Scientific and Townson & Mercer.  This clearly was to be quite a major step from a secure position in the University to the big unknown!

So Imbros Scientific launched in May of 1974.  As Gavin completed his year at Uni, I started in the business, having resigned my position as a computer programmer with ICL.

It was a very interesting time with my father and mother travelling to Europe for a major scientific market in Germany.  They made many contacts with people and businesses that were keen to export to Australia.

I personally made contact with many laboratory managers around Tasmania to get an understanding of what products and services they needed.

In 1975 my father Gavin joined fulltime and we were a very good team building the business.  Clearly there were great opportunities and the business grew well.

So business premises were leased in Moonah then later relocated to the Maypole corner in New Town after that historic building had been purchased.

It grew from there.

Products that sold in early years included stopwatches from Switzerland, histology dyes and stains from France, laboratory glassware and plasticware from Australian importers, and microscope slides and coverglass slips from Switzerland.

This product range increased, especially as environmental monitoring became de rigeur.  Business relationships strengthened with great local loyalty and support from overseas exporters.

Those were the early hey days!

Euan Hills, Gavin’s first son, and first official employee of Imbros

Read more

Written by:

Comments Off on In Memoriam: Gavin Hills – Imbros Founder – celebrates a posthumous 100th Birthday November 18, 2019 /

NOW AVAILABLE: Hach CL17sc Chlorine Analyzer

News

New from Hach – the CL17sc chlorine analyzer. Built on a legacy of reliability in online chlorine analysis. the CL17sc features an advanced design that reduces hands-on routine maintenance while providing powerful diagnostic features and enhanced connectivity. The result is less hassle, less risk of data loss and more information to empower your decision-making.
Easy maintenance
The CL17sc reduces your routine maintenance touch-time via programmable alerts, simplified tubing replacement, and step-by-step maintenance instructions.
Expanded connectivity and more flexibility
The CL17sc is now connected to Hach’s SC controller platform, giving you more flexibility to store, transfer, and interact with your process chlorine data. Benefit from internal data logging, external analog and digital communication alternatives, and multiparameter instrument flexibility.
Comprehensive diagnostics
Thanks to upgraded features like a flow sensor, colorimeter window, multicolored status light, and predictive diagnostic software, you know your CL17sc is operating as intended.
Imbros will be able to supply your CL17sc as soon as it’s available. Our engineers and experts will be available to answer any questions or assist with troubleshooting as you set up and use your new analyzer.

Get in touch

Read more

Written by:

Comments Off on NOW AVAILABLE: Hach CL17sc Chlorine Analyzer September 24, 2019 /

Australasian Coasts and Ports, 2019

Events

 

Australian Coasts & Ports 2019 will be relevant to any person with a professional interest in the coastal, maritime and marine environments. The conference will bring together engineers, planners, scientists and researchers to focus on the technological, scientific, policy, planning and design issues related to our diverse and developing coasts. It will integrate ideas and knowledge among engineers, port and maritime operators, researchers and scientists, local/central government, maritime manufacturers, planners, policy makers and media.

If you’re attending, make sure to stop by our booth and say hello! We’ll have our marine science experts attending, ready to help you with any queries you might have about the latest oceanographic equipment.

For more information, visit coastsandports2019.com.au.

See you there!

Read more

Written by:

Comments Off on Australasian Coasts and Ports, 2019 September 4, 2019 /

Sequoia releases powerful new ocean colour remote sensing technology

News

Research and innovation continue to thrive within the science and engineering teams at Sequoia Scientific, Inc. (Sequoia), which announces today the Hyper-bb product offering. Sequoia scientist Dr. Wayne Slade has developed a hyperspectral backscattering instrument (Hyper-bb) through a NASA Phase II SBIR (Small Business Innovation Research) grant. A prototype has been delivered to NASA for testing. This is Dr. Slade’s and Sequoia’s second SBIR-funded development and delivery in 2019.

Hyperspectral backscattering has been identified as a measurement gap in closure and validation studies for planned hyperspectral ocean colour sensors, such as NASA’s planned Plankton, Aerosols, Cloud, ocean Ecosystem (PACE) mission. Hyper-bb employs technology similar to existing backscattering sensors used in the ocean optics community, but extends the spectral coverage using continuously varying bandpass technology. Hyper-bb’s backscattering measurements with higher spectral coverage complement other currently available instruments measuring hyperspectral optical properties, including absorption, beam attenuation, and radiometry.

The Hyper-bb is a submersible instrument, rated to 600 meters, with internal data storage, and is easily integrated into existing moored and profiling packages. The backscattering measurements collected by the Hyper-bb are highly relevant to ocean colour remote sensing and ocean biogeochemistry research.

The Hyper-bb product is expected to be available for order in Q1 2020. For more information, get in touch!

 

Read more

Written by:

Comments Off on Sequoia releases powerful new ocean colour remote sensing technology July 30, 2019 /

‘Super Turbidity’ Explained

Advice

This article was originally published by Sequoia Scientific. It details the advantages of their new ‘Super Turbidity’ sensor; the LISST-AOBS

 

The short explanation

Briefly, the difference between turbidity and Super-Turbidity (Patent Pending) can be summarized as follows:

Turbidity (NTU) = Optical Backscatter; Needs Calibration for SSC; less accurate
Super-Turbidity (mg/l) = Optical & Acoustic Backscatter; No Calibration for SSC; more accurate

  • NTU: Nephelometric Turbidity Unit
  • SSC: Suspended Sediment Concentration

 

The slightly longer explanation

Traditional turbidity sensors deliver a reading in NTU, which must be calibrated to SSC with samples. Turbidity sensors are highly sensitive to fine particles, and insensitive to large particles. In contrast, the LISST-ABS delivers a DIRECT reading of SSC in mg/l and has a nearly constant sensitivity for particles larger than about 30 µm, out to about 500 µm. But, below this range, the response is also size dependent.

LISST-AOBS Super-Turbidity – the combination of a turbidity sensor and a LISST-ABS – delivers a direct reading of SSC in mg/l. This SSC reading is far more accurate for both fine and coarse particles than either sensor on its own.

LISST-AOBS Super-Turbidity compared to turbidity and LISST-ABS

The figure below shows a real-time plot of Super-Turbidity compared to the optical and acoustic backscatter sensors individually.

 

AOBS Super-Turbidity Real-Time

AOBS Super-Turbidity Real-Time

 

On the top plot we see time history of turbidity sensor output in V (orange) and LISST-ABS concentration in mg/l (blue). Each sample is at 1 s interval. The two sensors were installed together in a beaker with equal amounts of 5-10 and 75-90 µm particles. The particles were kept in suspension and well-mixed with a magnetic stir-bar. Around sample number 30 the stir-bar was turned off. A few seconds later the 75-90 µm particles have fallen out of suspension. We see the LISST-ABS concentration dropping almost 1,000 mg/l, but the fine 5-10 µm particles stay in suspension. Crucially, there is almost no response from the turbidity sensor; it does not see the coarse particles disappearing, only the 5-10 µm particles in suspension.

The bottom plot shows the COMBINED LISST-AOBS Super-Turbidity response from the two sensors, paired according to Sequoia’s patent pending method. The output is directly in mg/l. It is evident that the COMBINED output shows the concentration decrease from the large particles settling AND the concentration of the remaining finer particles.

 

The longer explanation

The figure below shows the response of the LISST-ABS and an optical turbidity sensor for a range of standard particles with varying grain-sizes. Each curve shows the response of the LISST-ABS (circles) or turbidity sensor (plusses) for a given grain-size as a function of concentration. Note that the concentration varies three orders of magnitude from ~5 mg/l to a few 1000 mg/l.

Let us look at the four LISST-ABS curves at the top of the plot. These are for particles from 40-80, 63-75, 75-90 and 125-150 µm in size. We can see that they are all very close together. We can also see that these four curves are on or very close to the 1:1 line (line not shown). This shows that the LISST-ABS measures the correct concentration, regardless of grain-size, as long as the particles are coarse. Note that the LISST-ABS output is directly in mg/l from the factory, without the need for any further calibration.

Let us now look at the two red, two green and one blue line from the OBS that plots together. These are for particles from 4-8, 5-10, and 10-20 µm in size. They all plot close together. This shows that the OBS output is constant for a given concentration, as long as the particles are fine. If desired, the OBS output for these fine particles can be calibrated to concentration with a high degree of accuracy.

 

Now, let us look at the second figure below.

This figure shows ALL data points from the previous plot. The data has been converted to LISST-AOBS Super-Turbidity using Sequoia’s patent pending methodology. It involves combining the data from the turbidity sensor and the LISST-ABS using a weight factor for the turbidity sensor output.

The units for the turbidity sensor output are completely irrelevant for the sensor pairing. It doesn’t matter if the turbidity sensor output is V, mV, FNU or NTU or any other unit. When pairing two sensors using Sequoia’s patent pending method, their COMBINED output will be in units of mg/l – as shown on the plot – regardless of the turbidity sensor unit.

Also shown on the plot is the 1:1 line. We can see that all data plot within a factor of two from the 1:1 line, regardless of changes in grain-size and concentration. This means that the combined output from the two sensors is far superior than each sensor on its own.

AOBS vs concentration

 

LISST-AOBS vs actual sediment concentration for a range of sediment grain-size

 

‘Super-Turbidity’ is a Sequoia-developed patent pending methodology.

 

CHECK OUT THE NEW SUPER TURBIDITY SENSOR

Read more

Written by:

Comments Off on ‘Super Turbidity’ Explained July 8, 2019 /

Sequoia Scientific invents ‘Super-Turbidity’ methodology (Patent Pending)

News

In a world’s first, Sequoia Scientific, Inc. has invented a method (patent pending) to pair turbidity data with their acoustic backscatter sensor; the LISST-ABS. This pairing of acoustic and optical data leads to a radically-improved estimate of Suspended Sediment Concentration (SSC), compared to that which either sensor can provide on its own. In fact, measurements of SSC with this new method are within a factor of 2 of the actual value (e.g. based on sampling and subsequent filtration).

This is an order of magnitude improvement over currently used technologies.

To get this incredible innovation into the hands of the world, Sequoia is introducing a new instrument system, the LISST-AOBS Super-Turbidity Meter.

 

 

What’s more, all existing LISST-ABS sensors can be expanded to the LISST-AOBS Super-Turbidity Meter. Also, all existing turbidity sensors can be expanded to the LISST-AOBS Super-Turbidity Meter.

The implications of the new method and the introduction of the LISST-AOBS Super-Turbidity Meter are two-fold:

1) Existing regulations (e.g. for stormwater, construction, environmental monitoring) that call for the monitoring of turbidity can be adhered to while…

2) the user – at the same time – can obtain an accurate estimate of SSC.

The impact of this new technology is sure to be huge. According to the United States Environmental Protection Agency, excessive sediment is the leading cause of impairment of the Nation’s waters – read the report here. High SSC values influence virtually all aspects of aquatic life in a detrimental manner. So accurate measurements of SSC with low-cost sensors that can be deployed for months or years are will bolster a wide range of environmental quality programs, remediation efforts, court cases and more.

The LISST-AOBS Super-Turbidity Meter can help provide the data needed to make the decisions that will protect the World’s waters.

Read more

Written by:

Comments Off on Sequoia Scientific invents ‘Super-Turbidity’ methodology (Patent Pending) June 26, 2019 /

AWA – Where the Waters Meet Conference, 2019

Events

 

Come visit Imbros at the ‘Where the Waters Meet Conference’!

The conference includes a members-only breakfast, comprehensive trade exhibition and full day conference proceedings.

We’ll be at Booth 4, showing off some of the latest instrumentation and equipment available from around the world. If you’d like to attend, visit the Australian Water Association’s website here.

WEDNESDAY 31 JULY, 2019
7.00-8.30am Members Breakfast, Wellington Room
8.00 – 5.00pm Trade Exhibition, Tasman Room
8.45 -5.30pm Conference, Plenary & break out sessions in the Wellington Room

WREST POINT CONVENTION CENTRE
Sandy Bay Rd, Sandy Bay, Hobart.

Read more

Written by:

Comments Off on AWA – Where the Waters Meet Conference, 2019 June 25, 2019 /

Join Imbros at AMSA 2019

Events

With nearly 1000 members from around Australia, AMSA is Australia’s peak professional marine science body. Their annual conferences allow institutions and marine scientists from all over the country to showcase cutting edge research and technologies, while strengthening networks and collaboration.

This year’s theme is ‘Marine Science for a Blue Economy’; a look at science that contributes to the health of our oceans and marine life, while also sustaining the economic and societal benefits that accompany a growing nation. With a great panel of national and international expert speakers and a huge range of exciting new advancements on display, if you haven’t already thought about attending, we’d recommend it highly.

 

REGISTER

 

If you are heading to AMSA, make sure you say hello! Imbros representatives Bryan (bryan.murphy@imbros.com.au) and Simon (simon.hills@imbros.com.au) will be there to show off some of the latest new equipment from our global supplier network, have a chat, and offer any advice you need for your next marine science project. We’d love to see you there.

Read more

Written by:

Comments Off on Join Imbros at AMSA 2019 June 12, 2019 /

Agilent Electronic Crimper Product Launch

News

Are you crimping or decapping manually?

 

We have great news for our friends and customers in high-throughput chromatography labs: Agilent Technologies are launching a new line of electronic crimpers to streamline your operations.

 

A suite of improvements to the existing handheld electronic crimpers and decappers make the new A-Line range more user friendly, intuitive and longer lasting – a perfect addition to your chromatography set up.

 

More vials crimped per battery charge.
Increased crimping speed when compared to previous models.

 

Less hand strain.
Lighter weight means less effort.

 

New OLED screen.
A far easier viewing interface – The display has been moved to the top of the device for easier viewing and operation for both left- and right-handed users.

 

Improved software.
New, multiple language readout capabilities and better crimping performance data.

 

Improved power signal.
Clearly see when the battery needs to be charged. Plus, more efficient charging with no overheating.

 

Extended productivity.
A new, brushless motor extends the life of the device significantly, while also reducing battery charging intervals.

 

Works with existing model 5 accessories.
Increased flexibility with legacy accessories.

 

It’s time to upgrade. These handheld electronic crimpers deliver tight, reproducible seals on every sample vial – regardless of cap material (works great with both steel and aluminium caps). The slim, adjustable jaws fit around closely spaced vials, which enables you to crimp vials directly in autosampler trays without the need to clutter your workspace or lose the order of your samples.

 

If you recycle or reuse vials, the device can also remove caps just as easily as it can put them on.

 

MORE INFORMATION

 

Make An Enquiry

Read more

Written by:

Comments Off on Agilent Electronic Crimper Product Launch June 5, 2019 /

Lending a hand to the Global Initiative for Honey Bee Health

Projects

In collaboration with the CSIRO and many other researchers around the world, Imbros is proud to be a part of the Global Initiative for Honey Bee Health (GIHH).

Not only is this incredibly important research – without bees, our supermarkets would be incredibly sparse – but it’s also pretty amazing to be a part of an initiative that’s fitting high-tech backpacks on bees.

 

 

These ‘backpacks’ are manually fitted to bees, and work similarly to the vehicle e-tag systems used in the mainland. Receivers are placed strategically on the hive, and identify individual bees as they come and go. It’s a great way to record their movements, and allows researchers to analyse the effects of a myriad of stress factors: disease, pesticides, air pollution, water contamination, diet and extreme weather. We’ll finally get the data we need to discover more about our busy friends and their ability to pollinate.

 

 

So how are we helping here at Imbros?

Our engineers have been helping the cause by building the receiver boxes to track and record the bees movements. We’ve helped to design and assemble these important instruments – finishing off 20 more this week for immediate deployment around the world.

 

 

Once fitted with the remaining antennas and sensors, these clever boxes will record and store all the data analysts need for a deeper understanding of the honey bee health crisis around the world.

We can’t wait to see the results.

Read more

Written by:

Comments Off on Lending a hand to the Global Initiative for Honey Bee Health April 11, 2019 /

The universal solvent – a guide to water purification and deionisation

Advice

When we talk about pure water, we usually think ‘clean’ and ‘fresh’. This is great for drinking, and the principle marketing tactic of the vast majority of bottled water companies. However, in order to guarantee the accuracy of our results in laboratory experiments and ensure the high-quality production of various materials (such as semiconductors, pharmaceuticals and photovoltaic cells) we need to stick to some much stricter specifications for purity than ‘clean’ and ‘fresh’.

Elements and compounds such as sodium, calcium, or copper – even present in the parts per billion range – could interact with samples, active media or system components.

This means, unfortunately, if you’re running a lab, even Mount Franklin or Voss isn’t going to cut the mustard. You can’t use ‘pure’ water. You’re going to need ultrapure water.

The Universal Solvent

Water dissolves more substances than any other liquid around. Hence, it’s known as the ‘universal solvent’.

The chemical composition of water is what gives it this unique attribute. The Oxygen atoms that make up H2O are positively charged, whereas the Hydrogen atoms are negative. The structure of their arrangement means that they line up end-to-end in a polar fashion. This allows water to attract many different types of molecules, and rip them apart by disrupting the attractive forces that keep them together. Ergo; dissolving them.

Just take a look at our oceans. Salt (Sodium Chloride), is dissolved readily in water. H2O molecules separate the bonds between the Sodium and Chlorine atoms, creating a solution of salt and water. As salt is quite a common molecule, and water is such a fantastic solvent, the salinity of our oceans is now, on average, 35 parts per thousand. That means for every liter of water, there’s approximately 35 grams of salt. Even more surprisingly, water could happily dissolve 9 times more salt (if it was available) before it became saturated. That’s about a third of its own weight.

Grading water purity

Now we know how readily water will take up impurities, let’s take a look at how we define ‘purity’.

For laboratory uses, water purity can be assessed using a range of techniques – depending on what the water will be used for. However, most commonly, purity is measured through resistance or conductivity.

Contrary to popular belief, water isn’t actually conductive. It needs suspended metals and ions to help it pass a charge. The more impurities in the water, the greater charge it can conduct. I.e: the lower the conductivity the more pure the water is. Thus, most water purity standards are measured by their resistance, usually measured in milliohms per centimeter (MΩ.cm).

There’s a few different grades of water purity. This is how the American Society for Testing and Materials (ATSM) defines them:

Type III – Primary Grade Water – less than 1 MΩ.cm at 25°C

Type III is clean – but it’s not technically ‘purified’. This grade of water is generally used for non-critical applications like rinsing glassware, filling water baths, and feeding autoclaves and other sterilisers.

Type II – Purified water – 10-15 MΩ.cm at 25°C

Type II water doesn’t quite reach the standards of ‘ultrapure’, but it’s still pure enough for general lab use. This is generally what is used to prepare medias or buffers.

Type I – Ultrapure water – 18.2 MΩ.cm at 25°C

Ultrapure water, by definition, only contains H20 and H+ (Hydrogen) and OH- (Hydroxide) ions. Everything else has been completely stripped away.

Type I water is used in manufacturing, as well as laboratory applications such as spectroscopy, spectrometry, histology, and more.

Producing your own ultrapure and deionised water

If you want ultrapure water – just water; nothing else – you’re going to need to put it through some pretty serious treatment to remove any unwanted ions or impurities. That means following one, or a few, of these methods.

Reverse osmosis

‘Osmosis’ describes the tendency of solvents to move through semipermeable membranes from solutes with a higher concentration into solutes of a lower concentration.

For example, water molecules inside a cell will travel through the cell wall when it’s submerged in saltwater. And if a cell is submerged in freshwater, water molecules move into the cell if the water inside is saltier.

Through this naturally occurring mechanism plant roots take up water from the soil, our intestines absorb water from a can of coke, and slugs shrivel up if you pour salt on them.

However, it is also possible to reverse osmosis with a technique called… well, ‘reverse osmosis’ (or ‘RO’).

Using a lot of mechanical force to push a solvent with a high solute content (i.e; saltwater) through a filter can help to remove any particles too big to fit through the gaps. It’s much the same process as removing rocks from sand with a sieve – but on a much smaller scale.

With some pressure and a semipermeable membrane with just enough room for water molecules to squeeze through, you can essentially filter out the sodium and chloride ions in salt water. You’re left with pure water and a waste brine solution.

Ion exchange

Another method of purifying water is by passing water through an ‘ion exchange resin’.

The resin is used normally in the form of small, porous beads. This gives the resin a high surface area, and helps water pass through easily.

Different resins will be coated in negatively or positively charged desirable ions (anions and cations, respectively). As the water passes through the resin, unwanted ions are ‘swapped out’ for more desirable ions, such as Sodium or Chloride. The resulting water can then be passed through reverse osmosis to easily remove the remaining impurities, giving you much more pure water than reverse osmosis alone could have achieved.

However, because of the nature of the process, the resin materials will become depleted over time. When the resins are ‘full’, they become unable to exchange ions any longer, and will need to be ‘cleaned’, ‘recharged’ or simply replaced.

Electrodeionization

The last, and perhaps most effective method of purifying water is through Electrodeionization (EDI). Most commonly, this is done through Merck-Millipore Elix® Water Purification Systems.

Rather than resin beads, electrodeionization uses an electric field to remove ions from your water. No beads means no need to change them regularly, which gives EDI a significant advantage over ion exchange systems.

EDI is often used, (as with ion exchange), in conjunction with reverse osmosis to ensure maximum purity. The water is first filtered to remove any large particulates, then treated with RO, and finally, through an electrodeionization field. Merck-Millipore guarantees water quality of >5 MΩ.cm at 25°C for most of their systems, however, they generally produce water at type II’s 10-15MΩ.cm range.

Storing ultra-pure water

Now that you have your ultrapure water, there’s a few things to consider.

Firstly, water doesn’t like being pure. Like an (ironically) dry sponge, it’s going to want to soak up anything it can. You’re going to need it kept in some very specific conditions to ensure it doesn’t pick up any harmful impurities such as organic or inorganic compounds, dissolved gases, or microorganisms.

This means your ultrapure water can’t be exposed to open air. This can be a rich source of contaminants such as carbon dioxide, volatile organics (if your laboratory uses solvents), acid fumes (if your laboratory uses strong acids), and of course, microorganisms.

Secondly, the material of the storage vessel should be carefully considered. Depending on the purity of your water, certain materials may leach contaminants. Glass, for instance, can release silica and sodium. Polymers can release plasticizers. Metal tanks can release metal ions.

Depending on the application you require your ultrapure water for, we would recommend selecting a storage option that releases the least harmful contaminants. Secondly, ensure that the inside of the tank is as smooth as possible. The reduced surface area will help lessen the amount of contaminants that can leach out of the container, and also make it harder for algae or bacteria to grow.

The best containers we have come across are often sold to be used in conjunction with Merck-Millipore Elix® systems. Depending on your requirements, these come with a range of features (such as UV lighting to keep algae and microorganisms from growing, etc) to prevent re-contamination. However, in order to guarantee purity and accurate test results, it is still not advisable to use them to store ultrapure water for extended periods.

The reality is; ultrapure water will eventually be recontaminated. It’s inevitable – there are simply too many ways that it can lose its purity over time.

If you need a steady source of ultrapure water for your laboratory, you’re going to need to create it on demand with a water purification system of your own. It’s simply not feasible to buy in bulk, and use as you need it.

Getting started with ultrapure water for your lab

If you’re looking for ultrapure water, storage, or a water purification system for your lab, we’d love to help you find the perfect solution.

Give us a call on (03) 6216 1500, or get in touch with the team!

Read more

Written by:

Comments Off on The universal solvent – a guide to water purification and deionisation March 21, 2019 /

Sequoia creates a NASA-funded, automated, continuous LISST for research vessels

News

Sequoia Scientific‘s fantastic new, NASA-funded prototype – LISST-Horizon, (previously known as FERPS; Flow-through Extended Range Particle Sizer) – has now been delivered for testing. We can’t wait to see the results.

This exciting, new instrument is designed (through NASA’s SBIR Program) for the continuous and automated measurement of suspended Particle Size Distribution in flow-through systems. Particle Size Distribution (PSD) is a key environmental parameter – essential for carbon cycle science, ecosystem and fisheries modelling, and harmful algal bloom detection and predication. Though its variability in the ocean isn’t well understood due to the present challenges of routine measurement. It’s not easy to track PSD over long stretches of time, or across large areas, as current methods are time-consuming, expensive and non-automated. Yet large PSD data sets are extremely important for research such as NASA’s new PACE project.

Sequoia set out to bridge this data gap with a brand new instrument capable of the constant measurement of PSD over large areas. The LISST-Horizon is self-contained instrument for bench-top deployment in a research vessel laboratory, designed to be plumbed into the continuous stream of uncontaminated seawater that travels through the ship’s flow-through system. As vessels traverse the oceans, Sequoia’s new prototype will use laser scattering to estimate the PSD of the water below them across a wide range of sizes. From sub-micron to hundreds of microns, even covering picoplankton to mesoplankton size scales. This allows for the continuous measuring of particle concentration, as well as inherent optical properties, beam attenuation and volume scattering.

Once completed, the LISST-Horizon will be an incredible new addition to the field of ocean optics, ocean biology, and biogeochemistry.

 

READ MORE FROM SEQUOIA

 

 

Read more

Written by:

Comments Off on Sequoia creates a NASA-funded, automated, continuous LISST for research vessels February 13, 2019 /

VideoRay Demo Day

Events

This event is now closed. Thank you to all who attended! 

Join us at Imbros HQ, Wednesday December 12, 2018, for a free demonstration of the latest from VideoRay.

We’ll be showing off two incredible new ROVs  – the Mission Specialist Pro 5, and Mission Specialist Defender.

DOWNLOAD BROCHURE

Mission Specialist Models

These new configurations are designed for speed and efficiency, weighing in at just 10kg. A forward speed of over 4.4 knots, a depth rating of up to 305m, and a system of interchangeable, modular components residing on a single, intelligent network. Get more information on these ROVs:

 

Where? 

When? 

Wednesday, December 12, 2018

10:00AM – 4:00PM

RSVP TODAY!

Fill out the form below, or get in touch with simon.hills@imbros.com.au for more information.

We’ll see you there!

Read more

Written by:

Comments Off on VideoRay Demo Day November 28, 2018 /

Global Initiative for Honey Bee Health

News Projects

CSIRO calls on researchers worldwide to join forces to save honey bees

Click here for more information from the CSIRO

Honey bees are essential for the pollination of about one third of the food we eat – including fruit, vegetables, oils, seeds and nuts – yet their health and ability to pollinate our crops is under serious threat.

To help tackle this worldwide problem, CSIRO is leading the Global Initiative for Honey bee Health – an international collaboration of researchers, beekeepers, farmers, industry, and technology companies aimed at better understanding what is harming bees and finding solutions to help secure crop pollination. Integral to the research effort are micro-sensors that are manually fitted to bees which work like a vehicle e-tag system, with strategically placed receivers identifying individual bees and recording their movements in and around bee hives.

 

“The tiny technology allows researchers to analyse the effects of stress factors including disease, pesticides, air pollution, water contamination, diet and extreme weather on the movements of bees and their ability to pollinate,” Professor Paulo de Souza, CSIRO Science Leader, said. “We’re also investigating what key factors, or combination of factors, lead to bee deaths on mass.”

“The sensors, working in partnership with Intel software, operate in a similar way to an aeroplane’s black box flight recorder in that they provide us with vital information about what stress factors impact bee health.”

As bees are normally predictable creatures, changes in their behaviour indicate stress factors or a change in their environment. By modelling bee movement researchers can help identify the causes of stress in order to protect the important pollinating work honey bees do and identify any disease or other biosecurity risks. CSIRO Pollination Researcher, Dr Saul Cunningham, said Australia has been very lucky, so far, to be the only country that doesn’t have the devastating Varroa mite, which has wiped out bee colonies overseas at an alarming rate.

“This puts Australia in a good position to act as a control group for research on this major issue that could one day become our problem too,” Dr Cunningham said. However, Australia’s horticulture and agricultural industries are particularly vulnerable to declines in honey bee populations as they rely on un-managed feral honey bees for much of their crop pollination.

“Our managed bee pollination services would be hard-pressed to meet the extra demand required to replace the key role un-managed honey bees play so, the outcome would likely be a drop in crop production and a rise in prices of popular food staples like fruit and veggies,” Dr Cunningham said.

The international initiative is being mounted to assist in uniting the efforts of those working in the critical area of protecting bee health. “The time is now for a tightly-focused, well-coordinated national and international effort, using the same shared technology and research protocols, to help solve the problems facing honey bees worldwide before
it is too late,” Professor de Souza said.

The GIHH proudly partners with the following industry members – Intel, Hitachi Chemical, Nissin Corporation and Vale, and brings together scientists from Australia, New Zealand, Brazil, Mexico and the United Kingdom.

Read more

Written by:

Comments Off on Global Initiative for Honey Bee Health November 26, 2018 /

Nortek Day 2018

Events News

This event is now closed. Thank you to all who attended! 

Monday 03 December 2018

Tauranga Yacht Club – 90 Keith Allen Drive,  Tauranga   3110,  New Zealand

Everything you always wanted to know about current, wave, underwater navigation and turbulence measurements, but were afraid (or embarrassed) to ask !

– Join Nortek experts and NZ/Aust scientists as they present the latest technology for a wide range of applications – from Marine Renewable Energy to Underwater Navigation

– Receive hands-on assistance with your specific data sets, instrument configuration and deployment setup questions

– Watch demonstrations of Nortek products and learn how to maximize data return

Interested in presenting your work ?
We would love to have your presentation !  Just submit an abstract (< 200 words) today for consideration to David.Velasco@nortekgroup.com

Got some special (or curious) data to show ?
Send us your data and a description of the deployment and we’ll showcase it as part of a special group session on discussing data analysis.

Register

Register today to secure a position – limited space!

Price is A$95+GST per person.  Please email your details to Bryan Murphy and we will forward you an invoice.

The price includes a full day of informative sessions, along with light morning tea, lunch and afternoon tea. Refreshments will also be available throughout the day.

For questions contact:
David.Velasco@nortekgroup.com
or
Bryan.Murphy@imbros.com.au (+61-3-6216-1500)

Read more

Written by:

Comments Off on Nortek Day 2018 November 26, 2018 /